2020 Mustang Excavators 80M

Information

2020 Mustang Excavators 80M

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Excavators 80M
  • Model: 2TE67L-BV4 Tier IV
  • Diesel
  • Available
  • Dozer Blade extended / retracted: 2'3" (680) to 2'9" (840 mm)
  • Max. Digging: 9'3" (2750 mm) | Max. Dump: 6'4.8" (1950 mm) | Dozer Blade: 7.1" (180 mm)

Specifications

  • 2020
  • Mustang
  • Excavators
  • 80M
  • Compact
  • Model: 2TE67L-BV4 Tier IV
  • Yanmar
  • Diesel
  • 30.9 cu.in. (0.507 L)
  • Net Power: 10.0 hp (7.68 kW) @ 2400 rpm
  • 0.28 gal./hr. (1.1 L/hr)
  • 2 variable, 2 gear
  • 5.2 gpm (19.6 L/min)
  • Working: 2625 psi (181 bar) | Swing System: 1001 psi (69 bar)
  • Oil: Standard
  • Cab/Canopy: / 4.2 psi (28.8 kPa)
  • Travel Speed - dual: 1.1 mph (1.8 km/hr) | Slew Speed: 8.4 rpm
  • Maximum Arm Digging Force without quick coupler: 1390 lbs. (631 kg)
  • Gradability: 20° | Max. Reach at Ground Level: 8'11.5" (2730 mm) | Minimum Front Swing Radius: 3'10.5" (1180 mm) | Blade Below Ground: 8.3" (210 mm) | Parallel Offset Right: 1'1" (330 mm) | Parallel Offset Left: 1'9.3" (540 mm) | Rear End Swing Radius: 2'4.5" (725 mm) | Boom Swing Angle - Left: 45° | Boom Swing Angle - Right: 90°
  • Digging: 4'11.1" (1500 mm) | Max. Vertical Wall Digging: 4'1.6" (1260 mm) | Max. Dig Depth with 8ft. (2.5 m) Flat Bottom: 1'8" to 2'9" (840)
  • on Ground:
  • 8'6.4" (2600 mm)
  • Undercarriage: 4'0" (1220 mm)
  • Max. Digging: 9'3" (2750 mm) | Max. Dump: 6'4.8" (1950 mm) | Dozer Blade: 7.1" (180 mm)
  • Dozer Blade extended / retracted: 2'3" (680) to 2'9" (840 mm)
  • 7'2.6" (2200 mm)
  • Base: 2'2.8"/2'9.1" (680/840 mm)
  • 7.1" (180 mm) | Type: Rubber / 7.1" (180 mm)
  • 5.1" (130 mm)
  • 2.6 gal. (9.7 L)
  • 1.5 gal. (5.7 L)
  • Pull: 1550 lbs. (703 kg)
  • No. of rollers per Side (track/idle): 2/1
  • with Canopy: 2348 lbs. (1065 kg)