2020 Mustang Radial Skid Steer Loaders 1050R

Information

2020 Mustang Radial Skid Steer Loaders 1050R

Features may include:

Operator's Cab

The 1050R features a new, state-of-the-art, fully-adjustable operator's cab.

Sound reduction material within the cab suppresses outside noise for a quieter operator environment.

A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.

Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.

Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.

Two control options include T-Bar or Hand/Foot.

All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.

Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1050R is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

Automatic glow plug heating system provides superior cold-weather starting.

After treatment meets all Tier IV requirements through proven technology.

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Radial Skid Steer Loaders 1050R
  • Available
  • Bucket: 70" (1778 mm)
  • Height to Hinge Pin - Fully Raised: 123" (3124 mm) | Dump Reach at Full Height: 27" (686 mm) | Rollback at Full Height: 95° | Dump Height: 94" (2388 mm)

Specifications

  • 2020
  • Mustang
  • Radial Skid Steer Loaders
  • 1050R
  • General
  • Yanmar
  • 4TNV98CT Tier IV
  • Gross Power (kW) @ 2500 rpm: 72 (53.7) | Net Power (kW) @ 2500 rpm: 70.7 hp (52.7)
  • @ 1625 rpm: 217 ft.-lbs. (294 Nm)
  • 202.6 cu.in. (3.3 L)
  • 12.00 x 16.5 HD
  • 12.00 x 16.5 HD
  • Battery: 12-volt (950 CCA)
  • 12-volt (3.0 kW)
  • 95-amp
  • Travel Speed - Maximum: 8.0 mph (12.9 km/hr)
  • Auxiliary Hydraulics - Standard: 23.5 gpm (90 L/min)
  • Rollback at Ground Level: 28° | Dump Angle: 40° | Clearance Circle - Rear: 64" (1626 mm) | Clearance Circle - Front w/o Bucket: 56" (1422 mm) | Clearance Circle - Front w/Bucket: 90" (2286 mm) | Departure Angle: 25°
  • Overall Operating Height - Fully Raised: 161" (4089 mm) | to top of ROPS: 81" (2057 mm)
  • Height to Hinge Pin - Fully Raised: 123" (3124 mm) | Dump Reach at Full Height: 27" (686 mm) | Rollback at Full Height: 95° | Dump Height: 94" (2388 mm)
  • to Chassis: 8" (203 mm)
  • with 70" Bucket: 143" (3632 mm) | without Bucket: 111.5" (2832 mm)
  • 49.5" (1257 mm)
  • 69.5" (1765 mm) | Narrow Offset Tire Option: 65.5" (1664 mm)
  • Bucket: 70" (1778 mm)
  • Seat to Ground Height: 40" (1016 mm)
  • Reservoir: 8 gal. (30.3 L)
  • Rated Operating Capacity: 2600 lbs. (1179 kg)
  • Tank: 21.5 gal. (81.4 L)
  • Approximate: 8180 lbs. (3710 kg)