2020 Mustang Radial Skid Steer Loaders 1650R

Information

2020 Mustang Radial Skid Steer Loaders 1650R

Features may include:

Operator's Cab

The 1650R features a new, state-of-the-art, fully-adjustable operator's cab.

Sound reduction material within the cab suppresses outside noise for a quieter operator environment.

A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.

Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.

Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.

Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.

Three control options include T-Bar, Joystick, and Hand/Foot.

All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.

Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1650R is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

Automatic glow plug heating system provides superior cold-weather starting.

After treatment meets all Tier IV requirements through proven technology.

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Radial Skid Steer Loaders 1650R
  • Available
  • Bucket: 61.5" (1562 mm)
  • to Hinge Pin - Fully Raised: 118.8" (3018 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump: 93.7" (2380 mm)

Specifications

  • 2020
  • Mustang
  • Radial Skid Steer Loaders
  • 1650R
  • General
  • Yanmar
  • 4TNV98C-NMS2 Tier IV
  • Gross Power (kW) @ 2500 rpm: 69.3 hp (51.7) | Net Power (kW) @ 2500 rpm: 68.4 hp (51)
  • @ 1820 rpm: 178 ft.-lbs. (241 Nm)
  • 201.4 cu.in. (3.3 L)
  • 10.00 x 16.5 HD
  • 10.00 x 16.5 HD
  • Battery (CCA): 12-volt (950)
  • 12-volt (3.0 kW)
  • 100-amp
  • Travel Speed - Maximum: 7.8 mph (12.6 km/hr)
  • Auxiliary Hydraulics - Standard: 18.9 gpm (71.4 L/min)
  • Rollback at Ground Level: 28º | Dump Angle: 38º | Clearance Circle - Rear: 57.7" (1466 mm) | Clearance Circle - Front w/o Bucket: 45.4" (1153 mm) | Clearance Circle - Front w/Bucket: 57.7" (1466 mm) | Departure Angle: 21º
  • Overall Operating Height - Fully Raised: 152.6" (3876 mm) | to top of ROPS: 76.7" (1948 mm)
  • to Hinge Pin - Fully Raised: 118.8" (3018 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump: 93.7" (2380 mm)
  • to Chassis: 6.3" (160 mm)
  • with 54" Bucket: 122.1" (3101 mm) | without Bucket: 93.9" (2385 mm)
  • 38.9" (988 mm)
  • Less Bucket: 63.2" (1605 mm)
  • Bucket: 61.5" (1562 mm)
  • Seat to Ground Height: 35.6" (904 mm)
  • Reservoir: 11 gal. (41.6 L)
  • Rated Operating Capacity: 1650 lbs. (748 kg)
  • Tank: 16.5 gal. (62.5 L)
  • Approximate: 6122 lbs. (2777 kg)