2020 Mustang Track Loaders 1050RT

Information

2020 Mustang Track Loaders 1050RT

Features may include:

Performance

The Mustang 1050RT Track Loader is taking performance to the next level.

Tier IV-certified Yanmar diesel engines provide 35 hp (26 kW)

The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.

Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work

Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the 1050RT Track Loader is designed for optimal operator comfort resulting in more productivity.

Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.

Multi-purpose LCD display provides easy readout during operation.

Easy Manager Telematics

Controls

Controls on the Mustang 1050RT Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Cab forward design enhances the view to the bucket.

Level II FOPS is standard equipment.

Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Track Loaders 1050RT
  • Available
  • Bucket: 54" (1372 mm)
  • to Hinge Pin - Fully Raised: 109" (2769 mm) | Dump Height - Fully Raised: 84" (2134 mm) | Specified Height: 57.7" (1466 mm) | Reach at Specified Height: 39" (991 mm) | Dump Angle at Specified Height: 72° | Maximum Rollback Angle at Ground: 32° | Carry Position: 5" (127 mm) | Maximum Rollback Angle at Carry Position: 32° | Angle of Departure with Standard Counterweight: 35°

Specifications

  • 2020
  • Mustang
  • Track Loaders
  • 1050RT
  • Compact
  • Yanmar/4TNV88C-KMS
  • 4
  • Naturally
  • 100 cu.in. (1.64 L)
  • 4
  • Gross Horsepower (kW) @ 2800 rpm: 35 hp (26)
  • Peak Torque (Nm) @ 1820 rpm: 80 ft-lbs. (109)
  • 12V/55A
  • Battery Volts: 12 V | Cold Cranking Amps at 0° F (-18° C): 800 CCA
  • Ground Speed - Single Speed: 6.3 mph (10.1 km/h) | Ground Speed - Single Speed: 6.5 mph (10.5 km/hr) | Ground Speed - Two Speed: 10.0 mph (16.1 km/hr)
  • Bucket Breakout - Tilt Cylinder: 4230 lbs. (1919 kg) | Bucket Breakout - Lift Cylinder: 5060 lbs. (2295 kg)
  • Auxiliary Hydraulic Flow - Rated Speed: 14.5 gpm (55 L/min) | High-Flow Hydraulic Flow - Rated Speed: 28.28 gpm (195 L/min)
  • Sound Power (Environmental): 101 dB(A) | Operator Ear: 85 dB(A)
  • Reach - Fully Raised: 26.5" (673.1 mm) | Dump Angle - Fully Raised: 38° | Maximum Rollback Angle - Fully Raised: 102° | Track Gauge: 40.9" (1039 mm) | Crawler Base: 50.5" (1283 mm) | Clearance Radius - Front with Bucket: 73" (1854 mm) | Clearance Radius - Rear without Counterweight: 50.8" (1290 mm)
  • Overall Operating Height - Fully Raised: 143.7" (3650 mm) | at ROPS: 71.5" (1816 mm)
  • to Hinge Pin - Fully Raised: 109" (2769 mm) | Dump Height - Fully Raised: 84" (2134 mm) | Specified Height: 57.7" (1466 mm) | Reach at Specified Height: 39" (991 mm) | Dump Angle at Specified Height: 72° | Maximum Rollback Angle at Ground: 32° | Carry Position: 5" (127 mm) | Maximum Rollback Angle at Carry Position: 32° | Angle of Departure with Standard Counterweight: 35°
  • with Bucket - w/o Counterweight: 117.5" (2985 mm) | without Bucket - w/o Counterweight: 88.9" (2258 mm)
  • 7.5" (191 mm)
  • Less Bucket: 50.8" (1290 mm)
  • Bucket: 54" (1372 mm)
  • 9.8" (250 mm)
  • Operating Capacity at 35% of Tipping Load: 1,050 lbs. (476 kg) | Operating Capacity at 50% of Tipping Load: 1,500 lbs. (680 kg)
  • Tank: 9.5 gal. (36 L)
  • Reservoir Tank: 8 gal. (30 L)
  • 1.75 gal. (6.62 L)
  • 4,720 lbs. (2141 kg)
  • Roller Type: Steel
  • Rubber | Rollers: 3