2020 Mustang Track Loaders 1650RT

Information

2020 Mustang Track Loaders 1650RT

Features may include:

Performance

The Mustang 1650RT Track Loader is taking performance to the next level.

Tier IV-certified Yanmar diesel engines provide 69.9 hp (52.1 kW)

The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.

Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.

Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work

Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the 1650RT Track Loader is designed for optimal operator comfort resulting in more productivity.

All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.

Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.

Standard, selectable 2-speed drive motors, horn and backup alarm.

Standard ISO drive pattern

Multi-purpose LCD display provides easy readout during operation.

Standard HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Easy Manager Telematics

Controls

Controls on the Mustang 1650RT Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Cab forward design enhances the view to the bucket.

Level II FOPS is standard equipment.

Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Track Loaders 1650RT
  • Axial Piston
  • Available
  • Bucket: 66.0" (1676 mm)
  • to Hinge Pin - Fully Raised: 119.6" (3038 mm) | Dump Height - Fully Raised: 91.2" (2329 mm) | Specified Height: 64.5" (1638 mm) | Reach at Specified Height: 22" (559 mm) | Dump Angle at Specified Height: 73° | Maximum Rollback at Specified Height: 68.6° | Grouser Height: 1" (25 mm)

Specifications

  • 2020
  • Mustang
  • Track Loaders
  • 1650RT
  • Compact
  • Yanmar/4TNV98C-NMS2 Tier IV
  • 4
  • Naturally
  • 201.4 cu.in. (3.319 L)
  • 4
  • Net Horsepower (kW) @ 2500 rpm: 68.4 hp (51)
  • Peak Torque (Nm) @ 1600 rpm: 178 ft-lbs. (241 Nm)
  • Radial Piston
  • Axial Piston
  • 14V/100A
  • Drawbar Pull / Tractive Effort: 9578 lbs. (4345 kN) | Bucket Breakout - Tilt Cylinder: 4230 lbs. (1919 kg) | Bucket Breakout - Lift Cylinder: 5060 lbs. (2295 kg)
  • 6.5 psi (0.45 bar)
  • Ground Speed - Single Speed: 6.5 mph (10.5 km/hr) | Ground Speed - Two Speed: 10.0 mph (16.1 km/hr)
  • Auxiliary Hydraulic Flow - Rated Speed: 18.9 gpm (71.4 L/min) | High-Flow Hydraulic Flow - Rated Speed: 28.5 gpm (119 L/min)
  • Reach - Fully Raised: 25.3" (641 mm) | Dump Angle - Fully Raised: 39° | Maximum Rollback Angle - Fully Raised: 98° | Maximum Rollback Angle at Ground: 28° | Carry Position: 7.8" (198 mm) | Maximum Rollback Angle at Carry Position: 28° | Digging Position - Below Ground: +2.1 (53 mm) | Angle of Departure with Standard Counterweight: 28° | Track Gauge: 53.4" (1356 mm) | Crawler Base: 49.8" (1265 mm) | Clearance Radius - Front with Bucket: 77.9" (1979 mm) | Clearance Radius - Rear with Standard Counterweight: 56.7" (1440 mm) | Angle of Approach: 90°
  • Overall Operating Height - Fully Raised: 157.8" (4008 mm) | at ROPS: 77.5" (1969 mm)
  • to Hinge Pin - Fully Raised: 119.6" (3038 mm) | Dump Height - Fully Raised: 91.2" (2329 mm) | Specified Height: 64.5" (1638 mm) | Reach at Specified Height: 22" (559 mm) | Dump Angle at Specified Height: 73° | Maximum Rollback at Specified Height: 68.6° | Grouser Height: 1" (25 mm)
  • with Bucket - Standard Counterweight: 126.2" (3205 mm) | without Bucket - Standard Counterweight: 94.2" (2393 mm)
  • 7.25" (184 mm)
  • 12.6" (320 mm) | Track Shoe Width: 12.6" (320 mm)
  • Less Bucket: 66.0" (1676 mm)
  • Bucket: 66.0" (1676 mm)
  • Operating Capacity at 35% of Tipping Load: 1650 lbs. (748 kg) | Operating Capacity at 50% of Tipping Load: 2357 lbs. (1069 kg) | Tipping Load: 4715 lbs. (2139 kg)
  • Pump: 11 qts. (10.4 L)
  • Tank: 16.5 gal. (62.5 L)
  • Reservoir Tank: 11.0 gal. (41.6 L)
  • 3.8 gal. (14.4 L)
  • 8143 lbs. (3693 kg)
  • Roller Type: Steel
  • Rubber | Rollers: 3