2020 Mustang Track Loaders 2100RT NXT3

Information

2020 Mustang Track Loaders 2100RT NXT3

Features may include:

Performance

The Mustang 2100RT NXT3 Track Loader was designed from the ground up...

Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)

Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.

Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.

Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work

Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the 2100RT NXT3 Track Loader is designed for optimal operator comfort resulting in more productivity.

Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.

Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.

Standard, selectable 2-speed drive motors, horn and backup alarm.

Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.

Multi-purpose LCD display provides easy readout during operation.

Single button allows simple scrolling and selection of various display functions.

Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:

Joystick Sensitivity

Position Reaction

Engine Response

AntiStall

Pump Swash Plate Position

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Track Loaders 2100RT NXT3
  • 4TNV98C-NMSL
  • Axial Piston
  • Available
  • Bucket: 73.9" (1877 mm)
  • To Hinge Pin - Fully Raised: 128" (3251 mm) | Dump - Fully Raised: 98" (2489 mm) | Specified: 67.7" (1720 mm)

Specifications

  • 2020
  • Mustang
  • Track Loaders
  • 2100RT NXT3
  • Compact
  • 4TNV98C-NMSL
  • Yanmar
  • 4-Stroke Turbo
  • Net @ 2500 rpm: 70.7 hp (52.7 kW)
  • Peak @ 1600 rpm: 206 ft.-lbs. (279.3 kW)
  • 203 cu.in. (3.319 l)
  • Tier IV
  • 4
  • Axial Piston
  • Voltage/Amperage: 14V/95A
  • Bucket Breakout - Tilt Cylinder: 6,631 lbs. (3008 kg) | Bucket Breakout - Lift Cylinder: 6,481 lbs. (2940 kg) | Dump Angle - Fully Raised: 39° | Pull / Tractive Effort: 11,489 lbs. (5211 kN)
  • Ground Speed - Single Speed: 6.1 mph (9.8 km/hr) | Ground Speed - Two Speed: 8.9 mph (14.3 km/hr)
  • 4.7 psi (0.32 bar)
  • Auxiliary: 21.8 gpm (82.5 l/min) | High-Flow: 35.9 gpm (135.8 l/min)
  • Reach - Fully Raised: 34.5" (876 mm) | Carry Position: 8.2" (208 mm) | Track Gauge: 51.7" (1313 mm) | Crawler Base: 58.4" (1483 mm)
  • Operating - Fully Raised: 168" (4267 mm) | Height at ROPS: 83.1" (2111 mm)
  • With Bucket - Standard Counterweight: 148.1" (3762 mm) | Without Bucket - Standard Counterweight: 116.5" (2959 mm)
  • Less Bucket: 69.5" (1765 mm)
  • To Hinge Pin - Fully Raised: 128" (3251 mm) | Dump - Fully Raised: 98" (2489 mm) | Specified: 67.7" (1720 mm)
  • Bucket: 73.9" (1877 mm)
  • 13.2" (335 mm)
  • 17.7" (450 mm)
  • At 35% of Tipping Load: 2,100 lbs. (953 kg) | At 50% of Tipping Load: 3,000 lbs. (1361 kg) | Tipping Load: 6,000 lbs. (2722 kg)
  • Reservoir Tank: 13.8 gal. (52.2 l)
  • Tank: 24 gal. (91 l)
  • Pump: 11 qts. (10.4 l)
  • 3.8 gal. (14.4 l)
  • 9,800 lbs. (4445 kg)
  • Roller Type: Steel
  • Rubber | Rollers: 5