2020 Mustang Track Loaders 3200VT

Information

2020 Mustang Track Loaders 3200VT

Features may include:

Performance

The Mustang 3200VT Track Loader was designed from the ground up with powerful breakout forces on the jobsite.

Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.

Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.

Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work

Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the new 3200VT Track Loader is designed for optimal operator comfort resulting in all-day productivity on the jobsite.

Pilot controls that have the controls mounted to the seat were they move with the operator.

Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.

Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.

Standard ISO drive pattern.

Multi-purpose LCD display provides easy readout during operation.

Single button allows simple scrolling and selection of various display functions.

Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:

Joystick Sensitivity

Position Reaction

Engine Response

AntiStall

Pump Swash Plate Position

Controls

Controls on the 3200VT Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.

New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.

Photos

Highlights

  • Norfolk, Virginia
  • 2020
  • Mustang
  • Track Loaders 3200VT
  • TD 3.6 EPA Final
  • Axial Piston
  • Available
  • Bucket: 83.9" (2131 mm)
  • To Hinge Pin - Fully Raised: 130" (3302 mm) | Dump - Fully Raised: 99.6" (2530 mm) | Specified: 76.3" (3243 mm)

Specifications

  • 2020
  • Mustang
  • Track Loaders
  • 3200VT
  • Compact
  • TD 3.6 EPA Final
  • Deutz
  • 4-StrokeTurbo
  • Net @ 2500 rpm: 108 hp (80.8 kW)
  • Peak @ 1600 rpm: 339 ft-lbs. (430 Nm)
  • 221 cu.in. (3.6 l)
  • Tier IV
  • 4
  • Axial Piston
  • Voltage/Amperage: 14V/95A
  • Bucket Breakout - Tilt Cylinder: 9901 lbs. (4492 kg) | Bucket Breakout - Lift Cylinder: 7491 lbs. (3398 kg) | Dump Angle - Fully Raised: 41° | Pull / Tractive Effort: 12,770 lbs. (5792 kN)
  • Ground Speed - Single Speed: 5.3 mph (8.6 km/hr) | Ground Speed - Two Speed: 7.8 mph (12.6 km/hr)
  • 5.3 psi (0.37 bar)
  • Auxiliary: 27 gpm (102.2 l/min) | High-Flow: 37.4 gpm (141.6 l/min)
  • Reach - Fully Raised: 40.4" (1026 mm) | Carry Position: 7.8" (199 mm) | Track Gauge: 51.7" (1313 mm) | Crawler Base: 61.8" (1570 mm)
  • Operating - Fully Raised: 169" (4293 mm) | Height at ROPS: 83.1" (2111 mm)
  • With Bucket - Standard Counterweight: 159.8" (4059 mm) | Without Bucket - Standard Counterweight: 127.7" (3243 mm)
  • Less Bucket: 69.5" (1766 mm)
  • To Hinge Pin - Fully Raised: 130" (3302 mm) | Dump - Fully Raised: 99.6" (2530 mm) | Specified: 76.3" (3243 mm)
  • Bucket: 83.9" (2131 mm)
  • 12.2" (309 mm)
  • 17.7" (450 mm)
  • At 35% of Tipping Load: 3200 lbs. (1452 kg) | At 50% of Tipping Load: 4571 lbs. (2074 kg) | Tipping Load: 9143 lbs. (4148 kg)
  • Reservoir Tank: 16.5 gal. (62.5 l)
  • Tank: 32.5 gal. (123 l)
  • Pump: 9 qts. (8.5 l)
  • 5.1 gal. (19.3 l)
  • 11610 lbs. (5267 kg)
  • Roller Type: Steel
  • Rubber | Rollers: 4